Sun Microsystems, Inc.   Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback



Sun Blade 1500 / SX1500

375-3118 375-3128
0MB w/o USIIIi 0MB 1.062GHz FRU

PCI Slot Numbering

PROBE SLOT BUS DEVICE TREE
1 4 B pci@1f,70000/*@3,*
2 0 A pci@1e,60000/*@2,*
3 1 A pci@1e,60000/*@3,*
4 2 A pci@1e,60000/*@4,*
5 3 A pci@1e,60000/*@5,*
PCI Bus A shares the address/data bus with on-board ATA-100,
Audio, Flash, I2C, NVRAM, Parallel, RTC, Serial, and USB devices.
PCI Bus B shares the address/data bus with the Ethernet controller.

Jumper Settings

JUMPER PINS SETTING DESCRIPTION
J9 1-8 Out JTAG Scan Header
J10 1-2
3-4
5-6
Out
Out
In
1.062GHz CONFIG[2:0] Bit 0 (011) *
1.062GHz CONFIG[2:0] Bit 1 (011) *
1.062GHz CONFIG[2:0] Bit 2 (011) *
J11 1-2
3-4
9-10
In
In
In
1.4V Core VID[4:0] Bit 4 (00110)
1.4V Core VID[4:0] Bit 3 (00110)
1.4V Core VID[4:0] Bit 0 (00110)
J14 1-2 In Unknown (default)
J18 1-2 In Unknown (default)
J21 1-3 Out Reset header
J26 1-2
2-3
In
In
Normal (default)
Program
J27 1-2 In Unknown (default)

* 1.064GHz UltraSPARC IIIi 527-1071 or 527-1087 or
    1.280GHz UltraSPARC IIIi 527-1087 is installed


 

Sun Blade 1500 Codename: Taco

Notes

  1. The minimum operating system is Solaris 8 5/03.
  2. The Sun Blade 1500 serial number is located on the upper left side of the front bezel.
    The serial number and factory configuration label is located on the rear of the chassis.
  3. The SX1500 does not have a system serial number.
  4. Connect the Sun Blade 1500 Rear Fan to the FAN1 connector. The Rear Fan will not rotate if connected to the FAN3 connector.

Memory Notes

  1. The Sun Blade 1500 requires DDR-1 SDRAM DIMMs.
  2. The minimum memory is two DIMMs in location DIMM 0&1 or 2&3.

SCSI Notes

  1. The Sun Blade 1500 does not have an onboard SCSI controller.
  2. Host Adapter Options 5010, 6540, and 6541 are not bootable in the Sun Blade 1500.

References

  1. Sun Blade 1500 Troubleshooting Card, 816-7563.
  2. Sun Blade 1500 Service, Diagnostics, and Troubleshooting Manual, 816-7564.
  3. Sun Blade 1500 Getting Started, 816-7565.
  4. Sun Blade 1500 Product Notes, 816-7569.
  5. SME1603MPGA UltraSPARC IIIi Processor Datasheet

  Copyright � 2011 Sun Microsystems, Inc.  All rights reserved.
 Feedback