Sun Microsystems, Inc.   Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback



Netra CP2300

Netra CP2300 Codename: Snowbird
Netra CT 820 Codename: Sanibel21

CP2300-650 / Netra CT 820

375-3121 375-3171 375-3295 F595-7404
650MHz
512MB FRU/CT 820 FRU
High Profile Memory
CP2300-650-512M
CP2300-650-2.5GB
CP2300-650-2.5GBHD
650MHz
512MB FRU
Low Profile Memory
CP2300-650-512MBLP
650MHz
512MB Ericsson FRU
Low Profile Memory
w/o Front Panel
CP2300-650-512-E
650MHz
2.5GB Lucent FRU
High Profile Memory
2× 1GB DIMM 370-6768
40GB Disk 375-3163
CP2300-650-2.5GBHD
375-3310 375-3312 375-3313 F594-1639
650MHz
512MB FRU
High Profile Memory
CP2300-650-512MB-4
CP2300-650-2.5GB-4
CP2300-6502.5GBHD-4
L
650MHz
512MB FRU
Low Profile Memory
CP2300-650512MBLP4
L
650MHz
512MB Ericsson FRU
Low Profile Memory
w/o Front Panel
CP2300-650-512-E-4
L
650MHz
2.5GB Lucent FRU
High Profile Memory
2× 1GB DIMM 371-1560
40GB Disk 375-3285
CP2300-6502.5GBHD4
L

Jumper Settings

SWITCH DIP SETTING DESCRIPTION
SW3 1
2
3
4
5
Off*
Off*
Off*
On*
On*
Proprietary - do not change
Proprietary - do not change
Proprietary - do not change
Proprietary - do not change
Proprietary - do not change
SW3 6
6
On*
Off*
1MB System and 7MB User Flash
7MB System and 1MB User Flash
(requires setsmcenv flash-device 4)
SW501
SW502
SW503
1-0
1-0
1-9
Off*
Off*
Off*
Transition Card EIDE Disabled
PIM A J7(Jn4) I/O<1-64> Enabled
PIM A J7 (Jn4) is user defined
SW501
SW502
SW503
1-0
1-0
1-9
On
On
On
Transition Card EIDE Enabled
PIM A J7(Jn4) I/O<1-29> Disabled
PIM A J7 (Jn4) is user defined
SW503 0 Off* cPSB Network Mode Enabled
Transition Card Ethernet Disabled
SW503 0 On cPSB Network Mode Disabled
Transition Card Ethernet Enabled
*   Default settings
SW501, SW502, and SW503 are on the solder side

Notes

  1. The minimum OS is Solaris 8 2/02 or Solaris 9.
  2. The Operating Environment Installation DVD is required.
  3. Use 1GB Memory 370-6768, Option XCP2300-MEM-1GB.
  4. Use Rear Transition Card 375-3134, Option XCP2300-TRN.
  5. Use 1GB Memory 371-1560, L, Option XCP2300-MEM-1GB-4.
  6. Use Rear Transition Card 375-3311, L, Option XCP2300-TRN-4.

UltraSPARC IIi Notes

  1. The 650MHz UltraSPARC IIi is similar to the 270-440MHz UltraSPARC IIi.
    Differences include integrated L2 Cache and SDRAM Memory Control.
  2. The 650MHz UltraSPARC IIi is based on the 500MHz UltraSPARC IIe.
  3. The 650MHz UltraSPARC IIi OBP and OS name is UltraSPARC IIe.

References

  1. Netra CP2300 Product Note, 816-7185.
  2. Netra CP2300 Transition Card Product Note, 816-7187.
  3. Netra CP2300 Technical Reference Manual, 816-7186.
  4. Installing Solaris on the Netra CP2300 cPSB Board, 817-1797.
  5. Netra CT 820 Installation Guide, 817-2641.
  6. Netra CT 820 Service Manual, 817-2642.
  7. Netra CT 820 Product Overview, 817-2643.
  8. Netra CT 820 Release Notes, 817-2646.

  Copyright � 2011 Sun Microsystems, Inc.  All rights reserved.
 Feedback