Netra CP2040
CP2040S-500
501-5721 |
500MHz 0MB FRU w Front Panel |
Jumper Settings
SWITCH |
DIP |
SETTING |
DESCRIPTION |
SW0501 |
1 2 |
On On |
SMC setting for non-HA system |
1 2 |
Off On |
SMC setting for HA system |
SW1801 |
1 2 |
Off Off |
Boot Flash PROM selected (default) |
1 2 |
On On |
User Flash PROM 1 selected |
1 2 |
Off On |
User Flash PROM 1 and 2 selected |
1 2 |
On Off |
ROMBO selected |
SW2401 |
1 1 |
Off On |
SCSI Bus A Termination Power enabled
SCSI Bus A Termination Power disabled |
2 2 |
Off On |
SCSI Bus B Termination Power enabled
SCSI Bus B Termination Power disabled |
3 3 |
Off On |
SCSI Bus A Termination enabled
SCSI Bus A Termination disabled |
4 4 |
Off On |
SCSI Bus B Termination enabled
SCSI Bus B Termination disabled |
Notes
- The Hostid and MAC address are in I2C SEEPROM 100-6223 at U3209.
- Use 256MB Memory mezzanine 375-3024, Option XCP2000-MEM-256.
- Use 512MB Memory mezzanine 375-3025, Option XCP2000-MEM-512.
- Use 1GB Memory mezzanine 375-3026, Option XCP2000-MEM-1GB.
- Use Rear Transition Card 375-0121, Option XCP2040-TRN.
- Use Rear Transition Card 375-3429, L, Option XCP2040-TRN-4.
- High Availability (HA) systems use the BD_SEL, HEALTHY, and PCI-RST
signals to control each slot.
Reference
-
Netra CP2040 Technical Reference Manual, 806-4994.
|