Disk Card
| Servers: |
Enterprise 4x00, 5x00, 6x00 |
Options 5161 / 5162 / 5163 / 5164
| Option 5161 |
Option 5162 |
Option 5163 |
Option 5164 |
2 × 2.1GB Disks
7200 RPM
0GB FRU 501-3113
Disk FRU 540-2936
Disk FRU 540-2730 |
2 × 4.2GB Disks
7200 RPM
0GB FRU 501-3113
Disk FRU 540-2938 |
2 × 9.1GB Disks
7200 RPM
0GB FRU 501-3113
Disk FRU 540-3704 |
2 × 18.2GB Disks
10000 RPM
0GB FRU 501-3113
Disk FRU 540-4177 |
| Assembly 501-4168 |
Assembly 501-5137 |
Assembly 501-5584 |
Assembly 501-5761 |
E4000, E5000, E4500, and E5500 Notes
- Up to four Disk Boards are supported.
- Install the Disk Board in any slot.
- The 4.2GB disk drive requires Disk Board >=501-3113-03.
- Disk Drives may fail to power up on Disk Board <=501-3113-02.
E6000 and E6500 Notes
- Up to two Disk Boards are supported.
- Install the Disk Board in Slot 14 and Slot 15 only.
- The 4.2GB disk drive requires Disk Board >=501-3113-03.
- Disk Drives may fail to power up on Disk Board <=501-3113-02.
- Install the Disk Board in Slot 15 if only one board is installed.
Default Drive Address Settings
The default drive address settings are assigned by the centerplane slot
position when a jumper is not installed on J0702 and J0703 Pins 1-2.
| SLOT |
DISK 0
ADDRESS |
DISK 1
ADDRESS |
|
SLOT |
DISK 0
ADDRESS |
DISK 1
ADDRESS |
0
1
2
3
4
5
6
7 |
4
6
0
10
2
12
8
14 |
5
7
1
11
3
13
9
15 |
|
8
9
10
11
12
13
14
15 |
10
0
12
2
14
8
0
10 |
11
1
13
3
15
9
1
11 |
Jumper Settings
Jumpers J0702 and J0703 override the default drive address settings
assigned by the centerplane.
| JUMPER |
PINS |
SETTING |
DESCRIPTION |
| J0702 |
1-2
1-2
A0-A3 |
Out
In
As required |
Disk 0 default address selection
Disk 0 manual address selection
Disk 0 address select |
| J0703 |
1-2
1-2
A0-A3 |
Out
In
As required |
Disk 1 default address selection
Disk 1 manual address selection
Disk 1 address select |
| J0705 |
1-2 |
As required |
Disk 0 delay spin |
| J0706 |
1-2 |
As required |
Disk 1 delay spin |
Notes
- Disk Board FRU 501-3113 does not include disk drives.
- 10000 RPM disk drives require Disk Board >=501-3113-05.
- The normal LED pattern is On-Off-On prior to Solaris 2.6 HW 5/98.
- The normal LED pattern is Off-On-Off in Solaris >=2.6 HW 5/98.
References
Ultra Enterprise 4000/5000/6000 System Manual, 802-3845.
-
Enterprise 4500/5500/6500 System Reference Manual, 805-2632.
|
