| 
 
 Dual Single-Ended Ultra/Wide SCSI (PCI)
 
| Workstations: | Ultra 5, 10, 30, 60, 80, 450 Sun Blade 100, 150, 1000, 1500, 2000, 2500
 |  
| Servers: | Enterprise 250, 450, 220R, 420R Sun Fire 280R, V120, V210, V240
 Sun Fire V440, V480, V490, V880(z), V890
 Sun Fire 4800, 4810, 6800
 |  
| Telco: | Netra 20, 120, st D130 |  
| Disk Arrays: | StorEdge D240, S1 |  
| Tape Libraries: | StorEdge L9 |  Option 6540
| 375-0005 |  
| Symbios SYM22801 w/o FCode
 3.3/5V 32Bit 33MHz
 |  
  Notes
  The minimum operating system is Solaris 2.5.1 Hardware: 4/97. 
  Dip switches enable/disable termination. 
  Ultra 5/10 OBP 3.11 Version 9 fixes BugID 4114784. 
  VHDCI is the Very High Density Cable Interconnect Standard. 
  A version of this card with FCode, F375-0013, was never used. 
  Option 6540 is not recognized by the SB1500 or SB2500 OBP. 
  (BugIDs 4996464, 4712295, 4974141)
  Option 6540 is not a bootable device in the SB1500 or SB2500.
  (BugIDs 4996464, 4712295, 4974141)
 Reference
 PCI Host Adapter Users Guide, 805-1271. 
 |