---

TurboZX

24-Bit Color Frame Buffer

Workstations:

SPARCstation 10, 10SX, 20

Option 1096

501-2503	501-2711	501-2502
2 Board Set w/o 340-2349	Upper Board	Lower Board

501-2503 Rear View

501-2503 Front View without Backpanel

501-2503 Front View with Backpanel

501-2503 with Backpanel and Upper Backpanel 340-2349

SS20 Cooling

	Side View 330-1661-02 and 540-2548-02
	Side View 330-1661-01 and 540-2548-01

---

TurboZX Upper Board

501-2711

Bottom Side

UNIX ID: /dev/leo0

TurboZX Lower Board

501-2502

Bottom Side

Notes

1. Solaris 2.3 requires Patch 101284-12.
2. Solaris 2.4 requires Patch 101921.
3. Solaris 2.4 with hyperSPARC requires Patch 101945.
4. The final software release is Solaris 2.6.
5. TurboZX was announced in May 1995 and discontinued in Nov 1995.
6. TurboZX uses the /opt/SUNWleo device driver.
7. Standoff 240-2716 and Screw 240-2102 fasten the boards together.
8. The SS10 and SS20 requires two 501-2840 Fan Cards.

Screen Resolution

1. The variable monitor_type is defined in /etc/init.d/leoconfig.
2. Make temporary changes to the screen resolution with the following command: /etc/opt/SUNWleo/bin/leoconfig -M monitor_type
3. Make permanent changes to the screen resolution by removing the comment symbol # from the desired setting in /etc/init.

References

1. TurboZX Installation Manual, 801-7829.

Notes

1. The SS10 and SS20 require two 501-2840 Fan Cards.
2. Flex Cable 530-2165 provides additional power to the TurboZX.

References

1. TurboZX Installation Manual, 801-7829.