---

Expert3D Lite

Codename: IFB Lite

24-Bit Color Frame Buffer

Workstations:	Ultra 60, 80 Sun Blade 100, 1000, 2000
Servers:	Sun Fire V880

Option 3684

375-0116	375-3052
3.3/5V 64Bit 66MHz 6760B FAB SB100 only	3.3/5V 64Bit 66MHz 6760C FAB

UNIX ID: /dev/fbs/ifb0

Compatibility Matrix

	Ultra 60	Ultra 80	Sun Blade 100	Sun Blade 1000	Sun Fire V880
375-0116-01	Tested	Tested	Tested	Tested	Not Tested
375-0116-02	Not Tested	Not Tested	Tested	Not Tested	Not Tested
375-0116-03	Not Tested	Not Tested	Tested	Not Tested	Not Tested
375-3052-01	Not Tested	Not Tested	Not Tested	Tested	Not Tested
375-3052-02	Tested	Tested	Tested	Tested	Requires I/O >=501-5142-12

Expert3D Lite Patches

Solaris Release	Patch
2.6	108788
7	108787
8	108576
9	112540

Notes

1. X3684A is not supported in the Sun Fire V880 shipped with 750MHz USIII.
2. On Ultra 80, Expert3D Lite will not fit into PCI 33MHz Slot 4.
3. On Sun Blade 1000/2000, if two Expert3D or Expert3D Lite boards are installed, patch >=108576-08 is required.
4. On a Sun Blade 1000, do not install in PCI Slot 1 (66MHz). Install only in Slot 2, 3, or 4 (33MHz).
   On other systems, the board is supported in either 33MHz or 66MHz slots.
5. If installed in a 33MHz slot, the board will run at 33MHz.

References:

1. fbconfig and SUNWifb_config manual pages
2. Expert3D Lite Graphics Card Installation Guide, 806-5932.