---

Expert3D

Codename: IFB

24-Bit Color Frame Buffer

Workstations:	Ultra 60, 80 Sun Blade 100, 1000, 2000
Servers:	Enterprise 450, 220R Sun Fire 6800

Option 3678

370-3987
Intense3D Wildcat 4110 3.3/5V 64Bit 66MHz

UNIX ID: /dev/fbs/ifb0

Expert3D Patches

Solaris Release	Patch
2.6	108788
7	108787
8	108576
9	112540

Notes

1. On a Sun Blade 1000, do not install in PCI Slot 1 (66MHz). Install only in Slot 2, 3, or 4 (33MHz).
   On other systems, the board is supported in either 33MHz or 66MHz slots.
2. The board will run at 33MHz if installed in a 33MHz slot.
3. Use Multiview Cable 530-2927 or E450 Multiview Cable 530-2989.
4. On E450, each Expert3D requires Fan board 370-4272 in a lower, adjacent, slot.
5. On Sun Blade 1000/2000, if two Expert3D or Expert3D-Lite boards are installed, patch >=108576-08 is required.
6. On Sun Fire 6800, each Expert3D requires Fan board 370-4272 in an adjacent slot.
7. The Sun Fire 6800 requires Expert3D >=370-3987-04 and Patch >=108576-25.

References:

1. fbconfig and SUNWifb_config manual pages
2. Expert3D Graphics Card Installation Guide, 806-1859.
3. Expert3D and Fan Card Installation for Enterprise 450, 806-5858.
4. Expert3D Graphics Card Installation for Sun Fire 6800, 816-4158.