1Gigabit/Sec PCI Dual FC Host Adapter+
Workstations: |
Ultra 60, 80
Sun Blade 1000, 1500, 2000, 2500 |
Servers: |
Enterprise 250, 450, 220R, 420R
Enterprise 3x00, 4x00, 5x00, 6x00, 10000
Sun Fire V440, V480, V490, V880, V890
Sun Fire 280R, V120, V210, V240, V250, 12K, 15K
Sun Fire 4800, 4810, 6800, V1280
Sun Fire E2900, E4900, E6900 |
Telco: |
Netra 20, 120, 240, 440, 1280
Netra t1400/1405 |
Disk Arrays: |
StorEdge A3500FC, A5000, A5100, A5200, 3510, 3511, 3900
StorEdge 6120, 6320, 6900, 6910, 6920, 9990, T3, T3+ |
Tape Libraries: |
StorEdge L25, L100, L180, L700, L5500, L8500 |
Option 6727
375-3030 |
QLogic QLA2212F/66-SUN
3.3/5V 32/64Bit 33/66MHz
L |
Fibre Cables
OPTION |
FRU PART # |
DESCRIPTION |
X973A |
537-1004 |
2 Meter SC-SC Fibre Channel Cable |
X978A |
537-1006 |
15 Meter SC-SC Fibre Channel Cable, 50/125 Multimode |
X9715A |
537-1020 |
5 Meter SC-SC Fibre Channel Cable |
X9720A |
130-4723 |
SC-SC Fibre Channel Cable Coupler |
X9721A |
537-1036 |
0.4 Meter LC-SC Fibre Channel Cable |
X9722A |
537-1035 |
2 Meter LC-SC Fibre Channel Cable |
X9723A |
537-1033 |
5 Meter LC-SC Fibre Channel Cable |
X9724A |
537-1034 |
15 Meter LC-SC Fibre Channel Cable |
Notes
- The minimum OS is Solaris 7 11/99 or Solaris 8 6/00.
- SAN 4.3 fabric boot requires FCode 1.14.02.
(Patch
111853-02)
Sun Fire V480 / V880 Notes
- For optimal performance in the Sun Fire V880, install this board
in Slots 7 and 8.
- Do Not use external Port 1 if internal Port 1 is connected to
V480 or V880 Loop-B.
- Do Not connect internal Port 1 to V480 or V880 Loop-A.
- SC Loopback Plug 530-3326 in Port 1 will resolve V480 and V880
BugID 5014917.
References
- Host Adapter Release Notes, 816-0261.
-
Host Adapter Installation Manual, 806-4199.
|