Sun Quad FastEthernet 1.0 (SQFE/S)
Workstations: |
SPARCstation 5, 10, 20
Ultra 1, 1E, 2 |
Servers: |
SPARCserver 6x0MP, 1000, SPARCcenter 2000
Enterprise 3x00, 4x00, 5x00, 6x00 |
Option 1042
Notes
- The minimum OS is Solaris 2.4 and Quad FastEthernet 1.0.
- QFE/S 1.0 uses the SUNWhmed device driver.
- QFE/S is not compatible with Sun Trunking 1.0.
- The SS1000 and SC2000 require OBP 2.26.
- One CPU per port is recommended for maximum throughput.
- Two CPUs per QFE/S is recommended for >=200MHz systems.
- SQFE <= 501-4302-03 fails the Fcode checksum test and will not
configure during boot if the E3000-E6000 is set to Diagnostic mode.
Set Keywitch diagnostics Off, OBP diag-switch? false,
and OBP diag-level min.
- Set the NVRAM variable local-mac-address? to true to enable the MAC
addresses of the network interfaces on the Quad FastEthernet board.
Reference
-
Sun Quad FastEthernet Installation Guide, 805-0732.
|