GigaSwift Ethernet 1.0 UTP
Workstations: |
Ultra 5, 10, 60, 80
Sun Blade 100, 150, 1000, 1500, 2000, 2500 |
Servers: |
Enterprise 250, 450, 220R, 420R
Enterprise 3x00, 4x00, 5x00, 6x00
Sun Fire 280R, 12K, 15K, E20K, E25K
Sun Fire V480, V490, V880, V890
Sun Fire 4800, 4810, 6800, E2900, E4900, E6900
Sun Fire V1280, V120, V210, V240, V250, V440, V20z, V40z |
Telco: |
Netra 20, 120, 240, 440, 1280
Netra T1, t1120/1125, t1400/1405 |
Options 1150 / 3150
501-5902 |
Unshielded Twisted Pair 3.3/5V 32/64Bit 33/66MHz |
Notes
- The minimum operating system is Solaris 2.6.
- Do Not install GigaSwift Ethernet with Ultra 5/10 PCI graphics options.
- Do Not install GigaSwift Ethernet and ESI/P on the same Ex000 PCI I/O Board.
- The <=501-5902-07 installed on Sun Blade 1000/2000 System Board
501-6230-07 or
Sun Fire V880/V880z Motherboard 501-6323-03 requires Solaris 8 Patch
>=111883-12
or Solaris 9 Patch
>=112817-04
for Schizo 2.4.
- Use of 1000mbps forced mode is not supported.
References
-
GigaSwift Ethernet Adapter Installation and User's Guide, 806-2989.
-
GigaSwift Ethernet Adapter Installation and User's Guide, 816-1702.
-
Release Notes, 806-2990.
|