Sun Microsystems, Inc.   Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

FDK PEX826-30
1850 Watt Power Supply

Servers: Sun Fire 4800, E4900

X4800-USIV-KIT / X4800-USIV-KIT-Z

300-1596 300-1931 300-2226
Type A185
AC Input Power Supply
Specification 950-4229
X4800-USIV-KIT
Type A185
AC Input Power Supply
Specification 950-4229
X4800-USIV-KIT-Z
L
Type A185
AC Input Power Supply
Specification 950-4229
X4800-USIV-KIT-Z
L

Front View
      Rear View

AC Input

200/220-240V   47-63Hz   12A/10A

DC Output

56.2Vdc 55.0Vdc
31.52A 1.45A

Sun Fire 4800 Codename: Serengeti 12
Sun Fire E4900 Codename: Amazon 4

Notes

  1. Sun Fire 4800 ships with 300-1460.
    Sun Fire E4900 ships with 300-1596, 300-1837, 300-1931, or 300-2224.
  2. Sun Fire 4800 requires 300-1596, 300-1837, 300-1931, 300-2224, or 300-2226 with UltraSPARC IV.
    Three 300-1596 power supplies are in upgrade kit X4800-USIV-KIT.
    Three 300-2226 power supplies are in upgrade kit X4800-USIV-KIT-Z.
  3. Mixing power supply part numbers is not supported except during an upgrade.
  4. Mixing 300-1596, 300-1931, or 300-2226 with Sun Fire 4800 Fan Trays FT0 540-4345, FT1 540-4344, or FT2 540-3586 is not supported.
  5. The 300-1931 was replaced by 300-2226 because of DecaBDE in the ejector handle resin.
  6. The European Unions October 12, 2005 exemption 2005/717/EC for use of DecaBDE from Directive 2002/95/EC ended July 1, 2008.
  7. The 300-2226 is not used in new system builds of the E4900 (as of 08/11/08).
  8. The 300-2226 replaced 300-1931 in X4800-USIV-KIT-Z in August 2008. (WO_39675)
  9. When replacing A153 or A185 PSUs on 4800/4900 systems, a press pin type handle may break. Please see FAB article 1000873.1

  Copyright � 2011 Sun Microsystems, Inc.  All rights reserved.
 Feedback