600MHz UltraSPARC III Module
Workstations: |
Sun Blade 1000 |
Option 6898
501-4999 |
4MB Cache Cheetah |
Notes
- The minimum Operating System is Solaris 8 10/00.
- The Sun Blade 1000 System Board supports mixed module speeds if the
UltraSPARC III frequency is a whole number multiple of 150MHz.
- If only one CPU module is installed, it must be in Slot 0.
- Use torque tool 340-6091 or 340-6395 to install this module.
Both are calibrated to 5.0 +/- 0.5 in/lbs (.565 Nm).
- A torque tool is included with systems that use this module.
- This module shipped in Sun Fire 280R part numbers 600-7035 and 600-7070.
References
-
Sun Blade 1000 Service Manual, 805-4496.
-
Sun Blade 1000 and Sun Blade 2000 Service Manual, 816-3217.
-
UltraSPARC III CPU Module Installation Guide, 806-4280.
-
Sun Blade 1000 UltraSPARC III CPU Module Installation Instructions, 816-0416.
|