Workstations: |
SPARCstation 10 |
Servers: |
SPARCserver 6x0MP, 1000, SPARCcenter 2000 |
Option 1161
Power
- 4.28 Amps @ +5Vdc
- 21.40 Watts
Notes
- The minimum operating system is Solaris 1.1 (SunOS 4.1.3).
- If two modules are installed, the minimum OS is Solaris 2.1.
- Mixing different module types is not supported.
- Set the SS10 clock speed to 80MHz.
- The 501-2270-04 is supported in the SS1000 and SC2000.
- This module is not compatible with 50MHz Sun-4d Control Boards.
- Surface mounted Fuse F0801 is not field replaceable.
Reference
-
SuperSPARC Module Installation Guide, 801-2035.
Servers: |
SPARCcenter 2000 |
Notes
- This module was used on early production SC2000 systems only.
- The 66MHz Control Board 501-1671-04 is required.
- This SM41 module is not compatible with SC2000 Control Board 501-1671-05,
501-2335, 501-2406, 501-2666, or 501-2674.
- Mixing different module types is not supported.
- Surface mounted Fuse F0801 is not field replaceable.
Reference
-
SuperSPARC Module Installation Guide, 801-2035.
Workstations: |
SPARCstation 10 |
Servers: |
SPARCserver 6x0MP, SPARCcenter 2000 |
Option 1164
Power
- 4.28 Amps @ +5Vdc
- 21.40 Watts
Notes
- The minimum operating system is Solaris 1.1 (SunOS 4.1.3).
- If two modules are installed, the minimum OS is Solaris 2.1.
- Mixing different module types is not supported.
- Set the SS10 clock speed to 80MHz.
- This module is not compatible with the 50MHz SC2000 Control Board.
- Surface mounted Fuse F0801 is not field replaceable.
Reference
-
SuperSPARC Module Installation Guide, 801-2035.
|