|
Format
|
Title
|
Description |
|
|
Configuration Rules for Mission Critical Storage |
Note: Some of the information in this document may be out of date.
This document is currently being reviewed and a new updated version is
expected to be available by December 2000.
Provides some general guidelines for configuring storage platforms to
match application requirements. These guidelines are designed to help
ensure high levels of availability first, good performance second, and
low cost last.
|
|
|
T3 Compatibility information (excerpts from the Sun StorEdge
T3 Array - Just the Facts) |
Contains information about supported platforms, operating systems,
software with the T3 arrays. |
|
|
T3 configuration diagrams (excerpts from the Sun StorEdge
T3 Array - Just the Facts) |
Contains information and diagrams on connecting 2 to 8 T3 arrays
to one or two systems. |
|
|
Sun StorEdge network FC switch-8 Installation, Documentation
and Configuration Guide |
Describes how to set up the Sun StorEdge network FC switch-8
hardware and configure it to the network. |
|
|
Sun StorEdge Network FC Switch-8 and Switch-16 Configuration
Supplement for SAN 3.1 Disaster Tolerance Configurations |
The rules for the Sun StorEdge Network FC Switch-8 and Switch-16
Sun SAN 3.0 have been extended to suppo rt additional configurations for
disaster recovery scenarios. This document lists the modifications to the
configuration ru les in the Sun StorEdge Network FC Switch-8 and Switch-16
Sun Installation and Configuration Guide: Sun StorEdge SAN 3.0 Re lease.
It also provides illustrative examples to show use of the extended rules. |
|
|
Sun StorEdge network FC switch-8 and switch-16 Installation
and Configuration Guide |
Describes how to set up the Sun StorEdge network FC switch-8
and switch-16 hardware and configure it to the network. |
|
|
Brocade SAN Configuration Descriptions |
SAN configuration rules and examples for the StorEdge Network
FC Switch-8 and StorEdge Network FC Switch-16. |
|
|
Sun StorEdge T3 and T3+ Array Configuration Guide |
Describes the recommended configurations for the Sun StorEdge
T3 and T3+ disk tray for high availability, the maximum performance and
maximum storage capability. |
|
|
SOC+XT SAN Limited Program Overview and Purpose |
The purpose of the SOC+XT SAN Program is to allow existing
SBus servers to attach SAN storage devices in a controlled environment.
The focus of this program has been limited to those customers who are unable
not unwilling to migrate to Solaris 8/beyond. SunPS approval is required
on all SOC+XT configurations. SUN INTERNAL ONLY |
