Sun StorEdge[tm] D1000 Array: Repair Procedures
This section provides the most common repair procedures for the D1000.
The repair procedures are provided in the following manual:
 Sun
StorEdge A1000/D1000 Installation and Service Manual, Chapter 3, "Removing and
Replacing Components "
The table below provides the page numbers that each procedure begins on.
|
Component
|
Page Number
|
Tips
|
|
Disk Drive *
|
22 - 23
|
- Swapping a disk within a clustered environment could cause issue
for a customer's clustered environment in the future if the disk is
the quorum device (FIN I0520-1
)
- 18.2GB and 36GB IBM disk drives may be susceptible
to early life failures problem (I0724-2).
- Quantum (model# VK4550J or VK45J05) 4.2GB disk drives may fail to
spin up. (FCO A0113-3
)
|
|
Cooling Canisters
|
23 - 24
|
-
Storage A1000 or D1000 (Dilbert) Power supplies fail
with amber LED. (FCO A0162-1
)
|
|
Power Supply
|
25
|
-
A Power Supply failure on A1000/A3000 disk subsystems
currently results in no alarm. ( InfoDoc 21825
)
|
|
Controller Board
|
26 - 28
|
|
* - For instructions about how to do a Hot-Plug Disk Replacement, please refer
to the "Sun
StorEdge D1000 Storage Guide"
| 
