| SRDB
|
Synopsis
|
| 46701 |
Sun StorEdge[TM] A3000: Symptom:Save Module Profile Blank Fields |
| 43381 |
How to reset the battery age on an A1000/A3500 array |
| 27362 |
SCSI violation when booting a host with an
A3500 attached. |
| 27223 |
RM6 error during bootup: The message definition
file was not found |
| 26909 |
Fixing "held in reset" controllers with RM6 |
| 26744 |
RM6 - Commands fail with System_RmHomeDirectory
error |
| 26663 |
m6 GUI fails to allow user to modify configuration |
| 26425 |
How to recover original rdac c#'s with RM6.2.2
after boot -r |
| 25477 |
A3x00/A1000/rm6 - LUNS show up with 'sd' driver
instead of 'rdriver' |
| 25438 |
Disabling erroneous messages created by src/p
hardware raid card |
| 22142 |
Long boot times (90mins) with >8 LUN support
on A1000 and A3x00 configurations |
| 21804 |
Delete of LUN failed using RM6: lun has fs
mounted or application is accessing LUN... |
| 21724 |
RM6 - Array driver returns "Errored I/O, with
errno 5" in console |
| 21234 |
Problem getting 16 lun support to work on PCI
based systems with A1000/RSM2000/Sonoma |
| 20907 |
How to repair private region when
vxdisk list shows "online altused" |
| 20458 |
vxpartrmall:/tmp/vxvm/ can't open error
on cluster 2.X This error has been seen on sonomas only. However we run
into a case where it happened on A5000 photon disk array in a two node cluster
E6500 E4500. |
| 18532 |
Can't see LUNs and drives after terminating
creation process using Raid Manager |
| 18403 |
A3x00 Array not seen when shared between two
hosts |
| 17729 |
After a new installation of StorEdge A1000
or A3000, cannot see the Raid Modules in the rm6 GUI. Can see the devices
in format and they look healthy using the lad command and other command-line
utilities. |
| 17724 |
CC: Fatal error in ld: Bus Error (core dumped) |
| 17467 |
RAID 5 lun create hangs shows locked in rm6
gui cannot unlock or delete rm6.1 |
| 16806 |
Lun on sonoma/dilbert arrays was being created
using radutil command. It aborted and left lun in locked state. It cannot
be deleted or accessed under rm6 GUI. |
| 16759 |
Workshop fails with the error fatal error:
Glue::mkdirp("/./glue.gvest.haldane:0"): mkdirp() failed -- Permission denied
Exiting. exit code 2 |
| 16579 |
Raid Manager GUI fails to start when run remotely |
| 15797 |
RSM/2000 - unable to create more than one LUN |
| 15657
|
rdaemon coredumps |
