Dial-up pool

From Doge Microsystems
Revision as of 03:26, 23 March 2020 by DogeMicrosystems (talk | contribs) (Created page with "ROUGH NOTES: Install 2020-02-13-raspbian-buster-lite.zip Boot with a display and keyboard: sudo raspi-config Go to interface options, enable ssh Can now run headless. sudo...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

ROUGH NOTES:

Install 2020-02-13-raspbian-buster-lite.zip Boot with a display and keyboard: sudo raspi-config Go to interface options, enable ssh

Can now run headless.

sudo apt-get update sudo apt-get upgrade sudo apt-get install asterisk


use asterisk config from old tutorial as a base

When the usb tty was connected [ 949.972128] usb 1-1.3: new full-speed USB device number 4 using dwc_otg [ 950.105326] usb 1-1.3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54 [ 950.105342] usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 950.105351] usb 1-1.3: Product: USB2.0-Ser! [ 950.178055] usbcore: registered new interface driver usbserial_generic [ 950.178137] usbserial: USB Serial support registered for generic [ 950.181978] usbcore: registered new interface driver ch341 [ 950.182059] usbserial: USB Serial support registered for ch341-uart [ 950.182557] ch341 1-1.3:1.0: ch341-uart converter detected [ 950.184757] usb 1-1.3: ch341-uart converter now attached to ttyUSB0